For use on blast cleaned steelwork, and as an anti-corrosive primer/undercoat or primer finish for general structural steel work
Low temperature curing down to 0°C
High build airless spray capabilities
Good resistance to undercutting from damaged areas
Can be coated with most epoxy, acrylic or polyurethane coatings
Use as a basecoat for most thin film intumescent coatings
Available in RAL Classic, BS 381C and BS 4800 colours (except for luminescent, pearlescent, and metallic finish colours)
Mix 5:1 with hardener (hardener supplied)
For thinning and cleaning use 1031 thinner
For more information see attached Data Sheet
Colours are for guidance only and a colour swatch of the appropriate RAL/BS code should be obtained to confirm colour choice. Incorrectly chosen colours can not be returned or altered
Coverage Calculator
Unites
Total area²
Or enter length and width dimensions:
Length
Width
Litres Required*
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Reviews
There are currently no reviews of this product, why not be the first to write one?